Combining Stabilizers Successfully
I used to think that if you had to use two layers of stabilizer, you weren't using the right kind of stabilizer. That isn't necessarily true, especially when it comes to combining different types of stabilizers.
I was stitching a monogram on a quilted flannel bib. Should have been pretty straightforward, right?
The project was stitched completely in the hoop on a fabric-type water-soluble stabilizer.
The stitching on the first one showed tension problems. Some of the bobbin thread showed and stitches were not consistent.
For the second one, I floated a piece of medium-weight tear-away under the hoop.
Clip the stabilizer close to the stitching. It's okay to leave it in the piece because it will help support the stitching and will soften with subsequent washings.
The stitching looked much better, but still showed some less-than perfect areas.
For the third one, I added a layer of water-soluble film as a topper. It sat on top of the quilting and allowed a smoother surface upon which to embroider the monogram. What a difference it made.
Then, just tear away the excess WSS and toss it in the wash. Don't be afraid to try different combinations.
Debbie SewBlessed
Related Blogs
Do you stress over not having the exact thread brand or
color that a design calls for? Digitizers ut[Read more]
Stand Back refers to keeping your fabric from falling into the sewing field! And we do that wi[Read more]
Bunnycup has thousands of adorable designs and they are
half-off until March 12!
Some of my favorit[Read more]