Brother PE-700/PE-700II Users

Re: PE700 Embroidery Machine

macnsac — Tue, 21 Apr 2009 01:21:53 GMT

Well, I never thought of that...that the design might be out of alignment. I think I will try floating another layer of stabilizer and see if that helps. Thanks for the tip.

Mary Anne

Re: PE700 Embroidery Machine

pat71896 — Tue, 21 Apr 2009 00:50:24 GMT

Mary Anne - Sometimes, even after being checked by the best repairperson in the universe, we still have problems.

The design shown, with the outline out of alignment is actually a stabilizer problem. That may sound odd to you, but do try your design with an extra sheet of stabilizer. For the denim, I might recommend a tear-away stabilizer. Tear-away is less stabile than cut-away stabilizer, so if the tear-away does not help, try the cut-away.

You will not see the movement because it is so slight. A shift of 1/32" or even 1/64" will cause the issue. Change or use a stronger stabilizer, try your item again, and I think you will find success. FSL or standard designs are the same on this issue. What is most frustrating is that the satin stitch is the last to be placed. So, you have stitched 30,000 stitches and then the stabilizer fails to hold that design where it should be for the satin outline . . . .

Pat, The Avid Embroiderer

Re: PE700 Embroidery Machine

macnsac — Tue, 21 Apr 2009 00:00:19 GMT

Thank you. I wish that would solvie my problem. I found out early on that I needed the Class 15 bobbins, and I got them. I didn't have the problem right away, but after about a month I noticed it occasionally and thought maybe it was a quirk or maybe the digitizing. But, almost every design I do that requires the satin stitch around the outside shows the white bobbin thread and sometimes when there's a fill area of satin stitch on the design itself. People say to use the same bobbin color as the sewing color, but gosh, that's a lot of changing the bobbin, not to mention, my bobbin winder on the machine is unreliable at best. I wind bobbins when I need to using my 180D. Now, that's a workhorse. Only thing is, I can't do a lot of in-the-hoop projects because most of those are for the 5x7 hoop. And, the in-the-hoop projects almost always have the satin stitch outside border!!!

I was wondering if something like timing could affect that. But, I just got the machine back from being serviced, and it's still doing it. They always leave a piece of heavy fabric like denim, in the machine with a stitchout on it. And of course, there was nothing wrong with their sample. You can never replicate the problem with the repairman, whether its a car, refrigerator, or embroidery machine.

I do appreciate your input. Thank you.

Mary Anne

Re: PE700 Embroidery Machine

nanasue62 — Mon, 20 Apr 2009 23:23:07 GMT

I have the PE700 brother machine and was having some of the same issues you talked about with the bobbin thread showing through. I got onto the internet and checked several sewing sites and what I learned was I was using the wrong bobbin. PE700's use size 15 bobbins and the Nebs I had ordered and was using were not the Size 15- Changed to the size 15 bobbins and no more problems. Sews beautifully and no more bobbin thread showing through.

Hope this helps.

Nanasue62

Re: PE700 Embroidery Machine

pat71896 — Fri, 10 Apr 2009 04:02:46 GMT

pherfoxx Wanetah - I know what you mean, a good repair person is worth their weight in gold. My repair man has a total of 30 years in sewing and more recently 15 in embroidery. There is not too much that can get by him!

This is a great place to ask about a repair person, there are lots of great people who may have just the answer you need.

Pat, The Avid Embroiderer

Re: PE700 Embroidery Machine

pherfoxx — Wed, 08 Apr 2009 23:07:28 GMT

Hi mary Anne-- I* have a PE700 also I learned a long time ago these things just dont blow up if you change the directions you got back in 1802..---- try using the same thread in the bobbin you top sew with And it works with any kind of thread ---After I learned this machine will not bite you will be surprised how easy it is to use.. My problem with has been a repair man who knew it all and knew nothing--even let his wife and daughter --play-- with it. now im looking for a dependable repair man who knows about embroidery machines.. Know any?? I live in Melbourne Fla Hope this helps you pherfoxx Wanetah

Re: PE700 Embroidery Machine

pat71896 — Wed, 25 Mar 2009 21:21:25 GMT

So true, thanks Bonnie!

Pat, The Avid Embroiderer

Re: PE700 Embroidery Machine

desaulnier2006 — Wed, 25 Mar 2009 02:55:15 GMT

If you still have the PE-700, purchase some of pre-wound polyester bobbin thread from a sewing center or on the Internet. You may find that all your tension problems are solved.

I just purchased a new Brother PE-750 after using a used PE-150 that seemed to develop tension problems. Through various sources, I learned that the bobbin thread is really important. After I purchased some Fil-Tec Clear-Glide plastic sided prewound polyester embroidery bobbins from a sewing center and used them in the used PE-150, I was amazed to see that it worked fine. Obviously it hated the Sulky Extra Fine bobbin thread I had picked up at a Joann's, thinking I would save money by winding my own bobbins. Also, I had assumed that thread would work well since the PE-150 manual said to use #60-90 bobbin thread and "extra fine" was closer to the #90, and might work well with denser embroidery patterns. I should not have made that assumption!

I now use the Fil-Tec pre-wound bobbins with both machines with no problem. It can be purchased in bulk on the Internet. You need to determine if your machine takes the Style A (a.k.a Class 15 which is 7/16" wide) OR the Style L Bobbin (5/16" wide). My PE-750 takes the Style A which is wider, but the PE-150 takes the narrower Style L. (However, I bought an adapter at the sewing center which allows me to use the narrower bobbin in my PE-750 also.)

Good Luck. Bonnie

Re: PE700 Embroidery Machine

fasten8ng — Fri, 23 May 2008 18:07:28 GMT

Have you tried loosening the tension of the upper thread? Just a tiny bit may help. Shiela

Re: PE700 Embroidery Machine

pat71896 — Fri, 23 May 2008 01:56:29 GMT

Brother is a dependable name that I trust and appreciate.

I don't know how long they have been in business, but no one stays in business if they do not listen to the clients and respond accordingly.

I am sure that the other manufacturers are great as well. But, when I say "Brother" no one asks me "who??" That goes a long way to my appreciation of a long standing corporation.

When you think about ME (machine embroidery), the manufacturing community gave us something that allows us to be creative and gives us so much joy. Thank you to all ME Corporations, but especially Brother, because I am a fan.

NOTE TO RNH: What a beautiful avatar!!!! I will be doing a blog on needles at a future time. In the meanwhile, needles depend on what you are working on. It is necessary to buy 'embroidery' needles, and you do need to buy one that is sensitive to your material. For instance, if you are working on a knit, you need to use a ball point needle. I will go into detail in my blog. For now, I use a 11 needle. Ann has a great 'variety' pack http://www.annthegran.com/Product.aspx?t=1&i=7305 which has 80 needles for approximately $20. That covers a lot of sewing!

Pat

Re: PE700 Embroidery Machine

hvnlyhills — Thu, 22 May 2008 19:37:39 GMT

I have a PE700 that I got about a month ago and 3-270D's that I have bought over the past 3 years. I love them all! Brother makes it so easy to learn to use their machines. I tried a Singer Quantum a couple of months ago and sent it back VERY quickly! It was VERY confusing to use.

Anyway, I use both Rayon and Poly threads and do have better luck with the Poly. A lot of times it depends on the complexity of the design or perhaps how well it was digitized. I learned my lesson on inexpensive threads, too. I have had some really bad messes from them. I use a variety of brands, but only use quality threads.

Re: PE700 Embroidery Machine

shortone — Mon, 19 May 2008 04:51:36 GMT

have had my PE700 since last august and like my D270, it does not like rayon thread of any brand- loves poly and cotton of any brand, though sometimes lint is an issue. what amazes me is that I've had awfully good results with really cheap brands of thread on the same exact designs that were a disaster with my good expensive threads. love my baby though, and I'll use whatever thread works best

Re: PE700 Embroidery Machine

rnh — Sun, 18 May 2008 02:17:24 GMT

I'm so glad to hear people talk about specific bobbin thread! I haven't had any problems but am new at ME. I wasn't told during my free lessons after purchasing the machine that specific bobbin thread was needed for embroidery. Is it ONLY with embroidery or with routine sewing also?

Can anyone tell me what is the best size needle to use for embroidery? Or does it depend on the type of fabric?

I have an Innovis 4000D.... a lot of machine for a beginner, but my husband doesn't think small! What a nice guy!

Re: PE700 Embroidery Machine

hannahrickard1000 — Sat, 17 May 2008 20:29:07 GMT

Hi, I have a 190D, 5 years old and every time I use a different bobbin thread than brothers I have problems. I have just had the machine serviced, not cheap £140, about $250 but the machine is working better than ever. After speaking to the service engineer I will only use brother threads from now on.

Hannah Rickard

Re: PE700 Embroidery Machine

BaybeShell — Sat, 17 May 2008 16:37:33 GMT

I LOVE LOVE LOVE my PE700! The only time I had a problem with the bobbin thread showing on top, I just took the bobbin out, and rethreaded it again. Weird.. I know. I guess I wasn't paying attention and somehow goofed up a very SIMPLE process. I can't offer much help in that area.

I totally agree that if you have trouble, take it to someone who knows what they are doing. You'll love your machine, but if you have trouble, that will hinder your love!