in

Ann The Gran Community

Beautiful people who make beautiful things.

Stitchin' Shortcuts

August 2008 - Posts

  • Time For Kangaroos And Pop-Up Baskets?

     

     

    Hello Everyone!

    Now that you have some of the basic things down pat (right?), we can move along to some other things, like the fun stuff with ME and sewing! This selection will include a simple project I think everyone will not only enjoy doing, but giving as a gift as well.

    First and foremost we are going to discuss some of the tips, tricks and hints I have been talking about. Let us take for example just getting ready to do this project we are going to do today. What is the first thing you do? Do you first look at the field on which the embroidery will be going? Or do you first find a design to put on "something"? OK! Here's the scoop, we all want to have more time to do our craft, am I right? Yep! I thought so! So here is a list of things to consider when working on any project.

     

    The first thing you should do is look at the item you have chosen to do the embroidery on, while looking at it, just for kicks, let's go ahead and find the exact center. Second, what design(s) have you chosen for it? Again, for the heck of it, let's go ahead and re-size our design(s) and move them to either our card or machine ( whatever you do for your brand of machine). So, now we are ready to begin sewing,right? Not quite yet.

    Next let's go ahead and check the needle and if necessary, change it. Now prepare your colors on your Thread Pilot or if you are changing them one at a time, place them all to your right within easy reach. Prepare all of your necessary bobbins (this project will likely take two), place them within easy reach of your machine. Now do your test sew, and because I only had one of these I used a piece of cotton fabric, as I only wanted to make sure the re-sized design sewed out properly. Once this is done to your satisfaction, save the design to the machine for safe keeping. This will hold all the settings you have created with your test sew. Once the test is done and you are satisfied with it, remove it from the hoop, then prepare the hoop for the actual stitch out,and set it up ready to sew.

    What the test sew should have told you is (a) what type of stabilizer (b) is the design big enough for your item (c) how long it took to complete (d) what colors to use (e) was the needle type working well with the design (f) Was the proper speed working well with the design. Now I know this doesn't sound like much but when you put it all together, it is more that you think,

    By now you have already completed for the project, (1) the item prepared and already centered for your design (2) your thread colors set up on your Thread Pilot (3) your design(s) re-sized and moved to your machine (4) sewn out with your test sew (5) the stabilizers chosen (6) needle type (7) made any necessary changes in the design, needles and stabilizers (8) prepared the hoop for the actual project (9) saved it to the machine (10) wound your bobbins (11) moved everything where you need it to be for the actual project.

    Now you are ready to sew the design to the actual project. By doing all of this as you go along, it will save you so much time, instead of going back and doing them later. When you do that, you are actually performing the same tasks twice!

    This is called "Time Management". It is very important in everything we do, especially if you are still a working person and have little time to sew as it is. While working in the factory I learned really fast how to make the most of the time available to sew. You see, in doing this type of sewing everything is based on time. How long does it take for each step you are performing, and how many can a person do in an hour. By watching ourselves, and how we do certain things, we can improve on how we do them. The best way to do this, short of videotaping yourself, is to keep a written journal of the steps you take when doing your ME or sewing. Just number the paper from 1 to 25 and jot down each step as you do it, to complete a project. Once you have it in writing, it is easy to see how many steps it takes you to complete this project and what you can do to save yourself some time. There is something about having it in writing that makes you aware of the steps you have made to get the most out of your time. Many of us spend more time getting ready to sew than actually sewing, me included at times! (We won't go there!)  Wink

    I stack all items within easy reach, most of the time I don't even get up from my chair, except to do a thread change. I clip the thread as close to the Thread Pilot as I can and still get it into the tension spring, then tie the new color to the previously used one, then pull all of it through to the needle, thread the needle and start again. Rather than having to completely re-thread every time I have to change a color.

    I keep all of my stabilizers at the right of the machine and have them low enough that I can cut them from the wall unit. All of my thread is behind the machine, but the frequently used ones are at my right hand side. All of my scissors I keep on the right of my machine, as well as the bobbins I will be needing for the project, and my Sidewinder. Extra needles in the right hand drawer, as well as the screwdriver I use for my hoops and needles. The trash basket is also to the right of me within easy reach to discard anything I need to. If I am sewing multiple items, I keep them to the left of me so I can grab them easily. the main thing to remember is keep everything within easy reach and close proximity of your machine, without getting too cluttered. As you all know , though this is only a small part of the tips and tricks i was referring to, not necessarily a shortcut but more like training yourself to be more aware of what tasks you are performing and how you are completing each one.

    Now here is the project I promised you all! I would like to take this opportunity to introduce you to one of our Central Florida Gals, so:

    Introducing Norrie and her Laundry Hamper/ Diaper Stacker!                                                                                                         Norrie brought this project to the luncheon we had, and I thought it was really cool and different, not something everyone would think to embroider on for sure! The good news is that it has a dual purpose, it can be a laundry hamper or diaper stacker. It would be really awesome as a personal baby shower gift, or just to give to your kids to entice them to clean up their rooms! ( yeah right) I would also imagine that it could be used to store toys in as well - you could even personalize it for them.

    To complete this project you will need:

    1 Mesh Type Pop-up Laundry Basket

    Ann The Gran's Happy Animals Design Set

    1 Piece of Ann The Gran Water Soluble Stabilizer/Adhesive Back

    1 Piece of Ann The Gran Water Soluble Stabilizer for the toping

    Catalog Xpress

     

    The first thing to do is to turn the laundry hamper inside out. I made the design larger with Catalog Express, so it would better suit the size of the embroidery field. Now cut a piece of Ann The Gran's Water Soluble/Adhesive Back and put it on your hoop by peeling the backing off part of the way so you can attach it to the bottom of the hoop. Lay it on  your work area and then pull the rest of the backing off so as to attach it the rest of the way on the hoop, making sure it is a snug fit on the hoop, with no wrinkles. Cut off the excess stabilizer, making sure it fits snugly on your hoop and won't slip in any way. Next lay your laundry basket onto the sticky surface and smooth out gently with your hands to attach the two together. Now lay on your piece of Ann The Gran's Water Soluble Stabilizer and fit your hoop together, making sure it is smooth and gently smoothing it with your hands. (I will be honest with you, you may need the help of someone depending on your hoop type to help you tighten the hoop) Snug your hoop together as tightly as you can without stripping the screw; it must be fairly tight or it will pop out of the hoop. You are now ready to position it on the machine and lock it in, being careful not to pop the hoop. I also slowed my machine speed down as I thought it would aide in the stitching out so as not to jar it too much and pop the hoop. I used a "Sharps" needle because of the type of material it was being sewn on.

          This is what it should look like after hooping it. (Photo courtesy of: Norrie)

    I then began stitching the design to the basket.

     

     

    Once it got started good I then was able to take a bit of a break until the color change.   

     

     (Photos courtesy of T. Alcumbrack)

    It was not too bad clipping the threads, and changing colors, at least not as bad as I first thought. Thanks to Norrie for supplying me with the directions and some photos so I knew how to do this project.

     

     

    All you do when the design is complete is to turn the basket right side out. Here is the finished product, a cute and lovable Kangaroo and Baby! Perfect for a diaper stacker!

                         

     It was an enjoyable project that is easily completed in an hour or less by anyone from beginner to seasoned ME'er! I purposely chose a design with very few color changes, as I think with this project it is much better with having to reach inside the basket to clip threads and do colors changes. I found Ann's Designs a joy to sew as well, they had only one time I actually had to trim a jump thread. Thanks Ann for designing the animals to sew out with few jump threads. Ann always makes it so easy for me to do a project!!

    A special Thanks to Norrie for her idea, and the use of her photos and directions. For taking the time to do this so I could feature her in this blog, she is a very busy lady so for her to do this was extra special for me!

     

    Suzy's Tip Of The Week!       By keeping your sewing room clean, it is a huge time saver! I like to clean up after every time in there, that way I know where things are when I return to it. Not having to look for everything when you begin is a big time saver as well. You can actually start your project instead of having to clean up before you begin. I know if you are like me you would rather be sewing than cleaning, but trust me it is worth the effort!

     

    Judy/AKA Suzy!   

                                                                              Remember to kiss someone you love today!

    Selvage: The edge of a piece of fabric, to prevent unraveling and is cut off before you start sewing. It also provides information about the fabrics such as design, manufacturer, colors in the fabric and the direction of the design or pattern.

    Hem: a finished edge, usually folded under and stitched also referred to as the bottom edge.

    Notch: On a concave curve, to make clips to allow for flattening the seam

    Til Next Time>>>>>>>>>>>>>>>>>>>>>>>>>>> Happy Stitchin!

  • Learning The Basics, Before Delving In With Both Feet!

                                                                                                  

    Now that we are formally introduced, I am going to be talking about some pretty basic things this time. At least for those of you that have been around for a while,with not only ME, but sewing in general. The following is a list of sewing terms that may help clarify more easily for you both in ME and regular sewing, on a regular basis:

    Basting Stitch> Is the longest stitch on the machine, and is used to hold the fabric in place, so you can sew out your design without everything shifting.

    Bias> The diagonal of the weave or a line across the grain of the fabric, drawn at a 45-degree angle to the selvage edge; cloth cut on the bias will stretch, allowing for smoother fit around curves.

    Selvage> the edge of a piece of fabric, finished by the manufacturer to prevent unraveling, and provide information as to the manufacturer, colors in the fabric and the direction of the design or pattern.

    Tension> the balance between the bobbin and the needle threads on a sewing machine, correct tension ensures a perfect stitch.

    Right Side> The patterned, printed, or figured side of a piece of fabric, the side that is intended to show.

    The reason for this is to familiarize yourself with some basics of sewing principles. I am a firm believer that before we can apply too many shortcuts, we must first learn some of the basics. Why is this important? It is important to learn some of these techniques so when buying fabric, it gives more of an idea what to look for. When you start a project, you should know what you are going to need to complete the project from start to finish. It is also important to know what and how much/many materials you will need before going to shop for this project. This way you can do the complete project the most efficient and cost effective way for all of our budgets. Last but not least, you know how to cut the fabric to suit your needs for this particular project idea. As with any thing else with ME, or sewing, it does require some planning.

                                                                           

    Now come the questions>>>How much am I going to need? 1 yard for a simple framed picture, or 3 yards for a wall hanging. Is this a very stretchy fabric? Like a t-shirt material, so you know what type of stabilizers to use, as well as needle choice. How wide is it? Fabric comes in various widths, so the wider, the more you will get out of it. What is the density (stitch count) of the design, and is it suitable for the chosen fabric? This is important to get the maximum effect, we need a fabric that can withstand the density of the design you have chosen. For instance, on a thin flour sack towel, I would choose a design like either a vintage or redwork, something that is light and airy. If you put something heavier than that on it, you are setting yourself up for disaster. For clothing I would use a design that is a bit light and airy, but that has more substance than a vintage design.

    Very important as most of us (me included) want to put some of those high density, beautiful designs on something that just will not withstand it. Remember, you cannot change the makeup of the fabric that you are using, You can only stabilize it to hold the chosen design. In short, the fabric is what it is, you can't change that fact. I once had a very smart lady tell me that you can never over-stabilize a design! You can ,however under stabilize it.

    What am I going to do with it? What project do you have in mind for this particular fabric, a wall hanging , or a quilt block? All these things are questions to ask yourself before sitting down at the machine. Most important question a lot of us ME folks who hoard fabric ask is, "when am I going to use this fabric"? The answer is, "Oh sometime in the future", and "Oh I know what the perfect thing is for this". With us that could take a while! These are all things we should ask ourselves when shopping for fabric. I like to get extra, so if I need 1 yard I get 4........See what I mean! Sound familiar?

                                                                                                                                                                               

    The next is cutting. Why is that important? A mistake in cutting cannot be taken out like a poorly sewn seam. With an expensive fabric it can become costly in a hurry. a very wise person told me long ago, "Measure twice, Cut once!" Words to live by in my book! I keep a note pinned in my sewing room to remind myself of this every time I go to cut anything. OK, is it obvious that I have a lot of sticky notes everywhere in my sewing room?

    A good measuring tool is the lip Edge Ruler. A lot of quilters use them, they are worth whatever you pay for them! I use mine for almost everything! The reason for that is that it will lay flat on your cutting mat and hold the fabric in place so you can take your rotary cutting tool and follow along the edge for a perfect cut every time. Again, planning is the key. There are many types of cutting tools, the most popular is the rotary, the cutting mat and the lip edge ruler. It is also likely the easiest to use.                                                          

                       

     

    Also with ME, I cannot stress enough how important it is to do a "Test Sew"! I have heard many excuses for not doing this. For me, it is a necessity! It tells you so much about not only the design, the weight of the combination of the design and the fabric, how they blend together, your stabilizer,h ow much and what type to use, colors, size of design, and yes even the needle type you should use! There are two mistakes that you can avoid, the first is Not making a sample, with your actual fabric, threads, and stabilizer you plan to use. Remember that everything shrinks at a different rate, and can leave your garment puckered and unwearable. The second is start ME'ing a design, only to realize too late that the design is not placed exactly where you wanted it. One way to predict how the embroidery will look and a way to place it on the garment; First, make your test sample, but don't remove it from the hoop, use chalk or rinseable marker, to draw a line around the inside wall of the hoop directly on the sample. Then remove the hoop, cut out the sample along the chalk line, and position it on the garment. Pin in place, mark along the edge of the sample directly on the garment (use only removable chalk or marker). When you remove the sample the remaining chalk circle is a perfect guide for placing the hoop to begin your embroidery, ensuring the design is exactly where you want it. I would rather lose a $5.00 piece of fabric rather than a $65.00 jacket. All it really costs me is some time and some thread, but I have guaranteed myself a beautiful, completely wearable garment!

    Suzy's Tip Of The Week!: Keep an Excel sheet of all of your thread colors and manufacturers, along with all of your sewing and ME needs. When you start running out, you can simply go to your sheet on the computer and put a mark next to the things you need, including, stabilizers (you get from ATG of course!),needles (what type and size), ribbons, elastic and so on. Add anything you may need either from the fabric store or online store. Print it out and take it with you. It is a wonderful time saver. The most effort you will put into it is at the very beginning when first making your list. Any trip to either the fabric store or online store is a breeze as it is all right in front of you including upc codes, manufacturers and where you got it from!

    Signing off until next time....................................................Happy Stitchin'!

    Remember to K.I.S.S  someone you love today!

     

    Judy/AKA Suzy !

About AnnTheGran -  Contact -  Site map -  Privacy Policy -  Security -  Gifts -  Shipping/Returns -  Links -  FAQ -  Thread Charts -  Print
©2005 - 2012 AnnTheGran and its contributors.